The magnetic cup assemblies use a ceramic magnet epoxied in a steel cup. The steel cup comes in nickel, chrome or powder coat finishes. The hole size of the cup can be custom made depending on customer's mounting requirements. There are various sizes of cup assemblies ranging from R-40 to R-80 depending on the holding and pull force required.

 

Sandwich assemblies can be supplied with ceramic or rubber magnets glued between steel plates. Number of magnets sandwiched between steel plates is determined by the customer's application. Custom assemblies can be made as per customer's application.
Channel assemblies are comprised of a ceramic or rubber magnet glued in a U shaped channel. The standard lengths are 1, 2, 4 and 6 inches.

APPLICATIONS:
Tools - Sign - Temporary License Plate Holders

MAGNETIC CUP ASSEMBLIES

Item #	Dim. A	Dim. B	Dim. C	Dim. D	Dim. E	Dim. F	Pull (lbs)	Finish
R40-159	1.438"	0.159"	0.265"	1.250"	0.375"	0.187"	14	Chrome
R40-189	1.438"	0.189"	0.265"	1.250"	0.375"	0.187"	14	Chrome
R-50	2.032"	0.265"	0.305"	1.770"	0.875"	0.225"	38	Chrome
R-70	2.625"	0.265"	0.375"	2.375"	1.000"	0.280"	82	Chrome
R-80	3.218"	0.375"	0.425"	2.840"	1.195"	0.330"	100	Chrome

Note: Standard Tolerances are +/-0.005" on all dimensions except for Dim B on R40-159 and R40-189 which is +/-0.001".

Thickness of steel cup for R40-159, R40-189 and R50 is 0.062" and for R70 and R80 is 0.078".

 

Custom To Specs - Prototype to Production
MAGNAWORKS TECHNOLOGY, INC.
36 Carlough Rd., Bohemia, NY 11716
Tel: 631-218-3431 · Fax: 631-218-3432

RARE EARTH MAGNETS | FLEXIBLE MAGNETS | CERAMIC MAGNETS | ALNICO MAGNETS
MAGNETIC ASSEMBLIES | HOME | E-MAIL